This firmware will be revision 4  and will flash the record light 4  times on start up.
To load this onto the remote, you need to:
1) save the FW0118_1.rff file to an SD card
2) with power OFF, insert the SD card into the remote
3) hold down the record button
4) turn power ON to the Nexus system
5) the record light will be solid green while the firmware is being loaded
 
After loading new remote firmware (FW0118_1.rff ) the open, close and demo files will be erased.
These files are also attached and will have to be reloaded.
This is done by copying the files to the SD card and holding the DEMO button down while turning power on.
 
The open, close, demo files attached are named with their firmware numbers.
If you would like to change the file names to  open, close, etc, feel free to do so. However, the file extension (.ocf, .ccf, .dmf) cannot be changed. 
